(in chronological order from the most recent):
238. A. Pola, L. Montesano, M. Gelfi, R. Roberti, G.M. La Vecchia, Aluminum segregation in ZA27 rheocast alloy, accepted for publication, Solid State Phenomena (2014)
237. Faccoli M., Roberti R., “Study of hot deformation behaviour of 2205 duplex stainless steel through hot tension tests”, Journal of Materials Science 48 (2013), pp. 5196-5203 [DOI: 10.1007/s10853-013-7307-8]
236. Maestrini D., Marconi G. P., Faccoli M., Roberti R., “Caratterizzazione di deposizioni di Zinco ottenute mediante Cold Spray”, La Metallurgia Italiana, n. 2/2013, pp. 33-40
235. A. Pola, R. Roberti, D. Rollez, “Evaluation of anisotropic mechanical properties of die-cast zamak5”, GIESSEREIFORSCHUNG, Vol. 64, ISSN 0046-5933 (2012), PP. 26-30
234. Faccoli M., Roberti R., “Probabilistic fracture toughness of a duplex stainless steel in the transition range”, Engineering Fracture Mechanics 97 (2013), pp. 207–215
233. M. Gelfi, A. Pola, R. Roberti, G.M. La Vecchia and E. Galli, “Failure analysis of an Electric Arc Furnace off-gas system”, Engineering Failure Analysis, Vol. 25, 2012, ISSN: 13506307, pp. 42-48
232. Roberti R., “Aggiornamenti in tema di Metallurgia: i comparti Ghisa ed Acciaio”, 75° Convegno Nazionale SIMLII, Bergamo, 17-19 Ottobre 2012
231. Gelfi M., Cornacchia G., Faccoli M., Panvini A., Roberti R., “Studio della resistenza a corrosione in diversi ambienti di acciai per il settore automotive”, Atti 34° Convegno Nazionale AIM, 7-9 novembre 2012, Trento, su CD-ROM, ISBN 978-8885298934
230. Maestrini D., Marconi G. P., Faccoli M., Roberti R., “Caratterizzazione di deposizioni di Zinco ottenute mediante Cold Spray”, Atti 34° Convegno Nazionale AIM, 7-9 novembre 2012, Trento, su CD-ROM, ISBN 978-8885298934
229. Roberti R., Cornacchia G., Faccoli M., Ghidini A., “On the crack path of rolling contact fatigue cracks in a railway wheel steel”, Proceedings of the 4th International Conference on Crack Paths (CP 2012), 19th-21st September 2012, Gaeta (Italy), su CD-ROM, ISBN: 9788895940441, ISSN: 2281-1060
228. Roberti R., Cornacchia G., Faccoli M., “Effect of increasing post weld heat treatment temperature on the fracture toughness of an ASME SA-542/SA-542M steel”, Giornata di studio su “Problematiche di frattura ed integrità strutturale di materiali e componenti ingegneristici”, Forni di Sopra (UD), Italia, 1-3 marzo 2012; ISBN 978-88-95940-43-4
227 A. Pola, L. Montesano, M. Gelfi, R. Roberti, "Semisolid processing of Al-Sn-Cu alloys for bearing applications", Solid State Phenomena, Vols. 192-193 (2012), PP. 562-568.
226. M. Gelfi, A. Pola, R. Roberti, G.M. La Vecchia and E. Galli, “Failure analysis of an Electric Arc Furnace off-gas system”, Engineering Failure Analysis, Vol. 25, 2012, ISSN: 13506307, pp. 42-48
225. A. Pola, R. Roberti, D. Rollez, "Evaluation of anisotropic mechanical properties of die-cast zamak5", High Tech Diecasting 2012 - Proceedings, Vicenza 9-10 febbraio 2012, ISBN 978-88-85298-87-3, CD-ROM
224. A. Mazzù, G. Donzella, M. Faccoli, C. Petrogalli, R. Roberti, (2011). Progressive damage assessment in the near-surface layer of railway wheel-rail couple under cyclic contact. Wear 271 (2011), pp. 408 – 416
223. A. Pola, R. Roberti, B. Rivolta, R. Gerosa, G. Silva, (2011). Studio della precipitazione in leghe AlSiCuMgAg trattate T6. La Metallurgia Italiana, 9, 2011, p. 47-51.
222. R. Roberti, G. Cornacchia, M. Faccoli (2011).On the extremely low cycle fatigue behavior of the concrete reinforcing bar B450C (FeB44k) steel. Atti XXI Convegno Nazionale IGF, Cassino 13-15 giugno 2011, ISBN 978-88-95940-36-6, p. 181-190.
221. A. Pola, L. Montesano, M. Gelfi, R. Roberti, (2011). Fracture toughness and corrosion resistance of semisolid AlSi5 alloy. ESAFORM 2011, AIP Conference Proceedings - American Institute of Physics, ISSN: 0094-243X (doi:10.1063/1.3589655) Springer, Vol: 1353, Issue: 1, Belfast April 2011, pp. 1051-1056
220. M. Gelfi, G. Cornacchia, S. Conforti, R. Roberti, (2010). Caratterizzazione di scorie di acciaieria e studio del rilascio di cromo. Atti del 33° Convegno Nazionale AIM, ottobre 2010, ISBN 9788885298804, atti su CD ROM.
219. M. Svanera, S. Panza, F. Uberto, R. Roberti, (2010). Un impianto innovativo nella filiera del recupero della scoria da forno elettrico. Atti del 33° Convegno Nazionale AIM, ottobre 2010, ISBN 9788885298804, atti su CD ROM.
218. A. Pola, L. Montesano, R. Roberti, (2010). Nuove leghe di zinco per l’industria del design. Atti del 33° Convegno Nazionale AIM, ottobre 2010, ISBN 9788885298804, atti su CD ROM.
217. A. Pola, L. Montesano e R. Roberti, (2010). Studio e caratterizzazione di nuove leghe di zinco. XXX Congresso di Fonderia Assofond, Ottobre 2010, presentazione orale.
216. A. Pola, R. Roberti, G. Polignano, P. Maniglia, (2010). Co-design di griglie per forni da trattamento termico in acciaio resistente al calore. Atti del XXX Congresso di Fonderia Assofond, Ottobre 2010.
215. Pola A., Gelfi M., Modigell M., R. Roberti, (2010). Semisolid lead-antimony alloys for cars batteries. Transactions Of Nonferrous Metals Society Of China, vol. 20 issue 9; ISSN: 1003-6326 (2010): 1774-1779
214. A. Pola, L. Montesano and R. Roberti, (2010). New zinc alloys for design industry. II Zinc Diecasting Focus Int. Conf., Vienna - Settembre 2010, presentazione orale.
213. M. Gelfi, L. Montesano, A. Pola, R. Roberti, (2010). Corrosion resistance of tool steel in molten zinc alloys. II Zinc Diecasting Focus Int. Conf. Proceedings, Vienna - Settembre 2010, atti su CD-ROM.
212. A. Pola, L. Montesano, R. Roberti, (2010). New zinc alloys for semisolid applications. International Journal Of Material Forming, vol. Vol. 3; p. 743-746, ISSN: 1960-6214 13th ed anche Proceedings Esaform Conference, Brescia – Aprile 2010."
211. A. Arrighini, M. Gelfi, A. Pola and R. Roberti, (2010). Effect of ultrasound treatment of AlSi5 liquid alloy on corrosion resistance. Materials and Corrosion - Werkstoffe und Korrosion , n. 61, 3, 2010, ISSN: 0947-5117, pp. 218-221.
210. R. Roberti (2009). Equipment for the treatment of slag from electric furnaces. European Patent n. 09425294.7-1215
209. A. Mazzù, G. Donzella, M. Faccoli, C. Petrogalli, R. Roberti (2009). Progressive damage assessment in the near-surface layer of railway wheel-rail under cyclic contact. Proceedings of the 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, ISBN 978-88-904370-0-7, 15-18 September 2009, Firenze, Italy, p. 99.104
208. A. Pola, R. Roberti (2009). ”Study of the effect of process parameters on the production of a non-symmetric low pressure die casting part”, La metallurgia italiana, n.11/12, 2009, ISSN: 0026-0843, pp. 57-63.
207. R. Roberti, M. Faccoli, A. Paderni (2009). On the step cooling treatment for the assessment of temper embrittlement susceptibility of heavy forgings in superclean steels. Proceedings of the Hot Forming of Steels & Product Properties, ISBN 88-85298-72-9, Grado (Go) 13-16 September 2009, Paper n. 33
206. R. Roberti, S. Conforti, G. Cornacchia (2009). On the simulation of thermal treatment on heavy section forgings. Hot Forming of Steels & Product Properties, Grado (Go) 13-16 September 2009
205. S. Panza, A. Paderni, M. Svanera, R. Roberti, P. Bettoni (2009). Recent tests about the production of VAR remelted ingots and future developments relating to remelting plants at ASO siderurgica. Proceedings of the Hot Forming of Steels & Product Properties, ISBN 88-85298-72-9, Grado (Go) 13-16 September 2009, Paper n. 42
204. M. Gelfi, A. Pola, A. Arrighini e R. Roberti (2009). “Effetto del trattamento ad ultrasuoni di leghe allo stato liquido sulla resistenza a corrosione”, 32° Convegno Nazionale AIM, settembre 2008, ISBN 88-85298-67-2, atti su CD-Rom + La metallurgia italiana, n.5, 2009, ISSN: 0026-0843, pp. 23-29
203. A. Arrighini, M. Gelfi, A. Pola and R. Roberti (2009). “Effect of ultrasound treatment of AlSi5 liquid alloy on corrosion resistance”, Material and Corrosion, DOI 10.1002/maco.200905303, ISBN 978-1-57698-046-0
202. A. Pola, A. Arrighini, R. Roberti (2009). “Effect of Ultrasounds Treatment on Alloys for Semisolid Application”, Solid State Phenomena Trans Tech Publications, Vols. 141-143, 2008, ISBN-13: 3-908451-59-0 / 978-3-908451-59-4, pp. 481-486
201. A. Pola, R. Roberti, L. Pape, M. Modigell (2009) “Rheological characterization of a new alloy for thixoforming”, Solid State Phenomena, Trans Tech Publications”, Vols. 141-143, 2008, ISBN-13: 3-908451-59-0 / 978-3-908451-59-4, pp. 301-306
200. R. Roberti, G. Cornacchia, M. Faccoli (2009), Analisi della tenacità a frattura di un acciaio inossidabile bifasico in regime di transizione. Convegno Nazionale IGF XX, Torino 24-26 giugno 2009; ISBN 978-88-95940-25-0, 349-356
199. A. Pola, R. Roberti (2009). “Invecchiamento delle leghe di zinco pressocolate, Fonderia e pressofusione”, anno 58 n.3, 2009
198. R. Roberti (2008). Impianto per il trattamento delle scorie del forno elettrico ad arco. Brevetto Italiano n. BS2008A000143
197. R. Roberti, A. Pola, M. Gilles, D. Rollez (2008). Primary and steady state creep deformation in Zamak5 die-casting alloy at 80°C. MATERIALS CHARACTERIZATION 59 (2008) 1747–1752
196. Roberti R., Pola A., Sabattoli L. (2008). Numerical analysis of the lubrication process in steel continuous casting. 6th European Conference on Continuous Casting 2008, Rimini 3-6 june 2008
195. A. Pola, M. Gelfi, L.E. Depero, R. Roberti (2008). “Study of annealing temperature effect on stress-corrosion cracking of aluminum brass heat-exchangers tubes by microdiffraction experiments”, Engineering Failure Analysis, Vol. 15, 2008, ISSN: 1350-6307, pp. 54-61
194. R. Roberti, G. Cornacchia, M. Faccoli, M. Gelfi (2008). On the strengthening mechanisms of 18 carat yellow gold and its mechanical behaviour. Materials Science and Engineering A 488 (2008) 50–54
193. GELFI M, POLA A, ARRIGHINI A, ROBERTI R. (2008). Effetto del trattamento ad ultrasuoni di leghe allo stato liquido sulla resistenza a corrosione. In: 32 Convegno Nazionale AIM. Ferrara, 24-26 settembre 2008, MILANO: Associazione Italiana di Metallurgia, AIM
192. M. GELFI, A. POLA, A. ARRIGHINI, ROBERTI R. (2008). Effetto del trattamento ad ultrasuoni di leghe allo stato liquido sulla resistenza a corrosione. In: 32° Convegno Nazionale AIM. Ferrara, settembre 2008, MILANO: AIM
191. G. Cornacchia, M. Gelfi, M.Faccoli, R. Roberti (2008). Influence of aging on microstructure and toughness of die casting die steels. International Journal of Microstructure and Materials Properties, Vol. 3, n. 2/3, 2008, p. 195-205
190. M. Faccoli, A. Ghidini, R. Roberti, (2008). A study of the strengthening mechanisms in the novel precipitation hardening KEYLOS® 2001 Steel. International Journal of Microstructure and Materials Properties, Vol. 3, n. 2/3, 2008, p. 424-438
189. A. Ghidini, R. Forcella, M. Diener, R. Roberti, (2007). Development of testing methodologies according to fracture mechanics criteria applied to railways solid wheels, 15th International Wheelset Congress 23 – 27 /09/2007 Praga
188. A. Ghidini, R. Forcella, M. Diener, R. Roberti, (2007). Fracture mechanics applied to the railways solid wheels manufacturing process, 15th International Wheelset Congress 23 – 27 /09/2007 Praga
187. R. Roberti, G. Cornacchia, M. Gelfi, S. Panza, A. Paderni (2007). NON-METALLIC INCLUSIONS IN THE INGOT: COMPOSITIONS AND ORIGIN. Joint Meeting on Metallurgical Fundamentals. Dalmine, 15 September 2007
186. CORNACCHIA G, GELFI M, MAPELLI C, PADERNI A, PANZA S, ROBERTI R. (2007). The role of mullite-based refractory chemical interactions on the formation of exogenous non-metallic inclusions in vacuum treated 0.3% C steel. ISIJ INTERNATIONAL. vol. 47, pp. 392-401 ISSN: 0915-1559.
185. ROBERTI R., FACCOLI M, VERONESI C (2007). Hot deformation behaviour of 2205 duplex stainless steel. In: Duplex 2007 International Conference & Expo. Grado, Italy, 18-20 june 2007, MILANO: Associazione Italiana di Metallurgia, AIM, ISBN/ISSN: 88-85298-60-5
184. POLA A, ROBERTI R., VISCARDI C. (2006). Prototyping in lost wax for zinc die casting. High Tech Die Casting 2006. 21-22 September 2006. (pp. Paper 42). MILANO: AIM (ITALY).
183. POLA A., R. ROBERTI, E. BERTOLI. (2006). Progettazione e caratterizzazione di nuove leghe per applicazioni in semisolido. BRESCIA RICERCHE. vol. 57.
182. POLA A., R. ROBERTI, E. BERTOLI. (2006). Characterization of a new aluminum alloy containing Ag for semi-solid applications. 3th International Conference High Tech Die Casting. 21-22 Settembre 2006. (vol. CD-ROM). ISBN/ISSN: 88-85298-57-5. MILANO: AIM (ITALY).
181. POLA A., R. ROBERTI, E. BERTOLI, D. FURLONI. (2006). Design and production of new aluminum thixotropic alloys for the manufacture of structural components by semisolid die casting. S2P, 9th Internation Conference on Semi-Solid Processing of Alloys and Composites. 11-13 Settembre 2006. (vol. 116-117, pp. 58-63). ISBN/ISSN: 3-908451-26-4. ZUERICH: Trans. Tech. Publications Ltd (SWITZERLAND).
180. P. ZANOLA, E. BONTEMPI, M. GELFI , M. TOSTI, R. ROBERTI, L.E. DEPERO. (2006). Structural and microstructural characterisation of ZrN coatings for decorative applications. ZEITSCHRIFT FUR KRISTALLOGRAPHIE. vol. Part 2 Suppl. 23, pp. 275-280 ISSN: 0044-2968.
179. P. ZANOLA, D. BENEDETTI, E. BONTEMPI, V. VILLA, G. BARONIO, M. TOSTI, ROBERTI R., L.E. DEPERO. (2006). Residual stress measurement of gold artefacts by Debye ring analysis. ZEITSCHRIFT FUR KRISTALLOGRAPHIE. vol. suppl. 23, pp. 61-66 ISSN: 0044-2968.
178. P. COLOMBI, P. ZANOLA, E. BONTEMPI, ROBERTI R., M. GELFI AND L. E. DEPERO. (2006). Glancing-incidence X-ray diffraction for depth profiling of polycrystalline layers. JOURNAL OF APPLIED CRYSTALLOGRAPHY. vol. 39, pp. 176-179 ISSN: 0021-8898.
177. M. Faccoli, A. Ghidini, R. Roberti, (2006). A study of the strengthening mechanisms in the novel precipitation hardening KEYLOS® 2001 Steel. Conf. Proc. TOOL 06, 7TH INTERNATIONAL TOOLING CONFERENCE, Torino 2 - 5 May, 153-161
176. G. Cornacchia, M. Gelfi, M.Faccoli, R. Roberti (2006). "Influence of aging on microstructure and toughness of die casting die steels", International conference TOOL 06, 2-5 maggio, Torino (Italia), 175-182
175. A. POLA, ROBERTI R., E. BERTOLI, D. FURLONI. (2006). Design and production of new aluminum thixotropic alloys for the manufacture of structural components by semisolid die casting. S2P, 9th International Conference on Semi-Solid Processing of Alloys and Composites. 11-13 Settembre 2006. (vol. 116-117, pp. 58-63). ISBN/ISSN: 3-908451-26-4. ZUERICH: Trans. Tech. Publications Ltd (SWITZERLAND).
174. GELFI M, BONTEMPI E, CORNACCHIA G, ROBERTI R., DEPERO, L E. (2006). Advanced X-Ray Laboratory Microbeam Techniques Applied to Metallurgy. MICROCHIMICA ACTA. vol. 155, pp. 151-155 ISSN: 1436-5073
173. G. DONZELLA, FACCOLI M., A. MAZZU', C. PETROGALLI; ROBERTI R. (2005). RCF-wear competition in railway wheel-rail interface. Giornata di Studio “Structural Integrity of Railway Wheels and Wheel/Rail Interface”, Brescia, 30 Novembre 2006
172. M. GELFI , A. POLA, L.E. DEPERO, R. ROBERTI. (2005). Effect of the Annealing Temperature on SCC of Aluminum Brass Alloy for Heat Exchanger Tube. Euromat 2005, 5-8 September, Prague, Czech Republic.
171. G. DONZELLA, FACCOLI M., A. MAZZU', ROBERTI R. (2005). Experimental investigation on competition between wear and rcf in a rail steel. ICF11 - 11th International Conference on Fracture. Turin, Italy, 20-25 marzo, su CD-ROM
170. A. POLA, ROBERTI R., E. BERTOLI, D. FURLONI. (2005). Analysis of semi-solid diecasting runner-gate system as a function of solid fraction. M&P 2005 International Conference on Materials and Processing. Seattle (WA), 19-22 giugno 2005. (vol. CD-ROM). TOKYO: JSME.
169. DONZELLA G, FACCOLI M, GHIDINI A, MAZZU A, ROBERTI R. (2005). The competitive role of wear and RCF in a rail steel. ENGINEERING FRACTURE MECHANICS. vol. 72, pp. 287-308 ISSN: 0013-7944.
168. POLA A., R. ROBERTI, D. ROLLEZ, C. VISCARDI. (2005). Prototyping in Lost Wax for zinc die-casting. DIE CASTING ENGINEER. vol. marzo, pp. 2-6 ISSN: 0012-253X.
167. D. FURLONI, A. POLA, ROBERTI R. (2005). Analisi del sistema di alimentazione dello stampo nella pressocolata in semisolido, in funzione della frazione di solido. BRESCIA RICERCHE. vol. 53, pp. 28-34.
166. A. Pola, R. Roberti, E. Bertoli, D. Furloni (2005). “Analysis of semi-solid diecasting runner-gate system as a function of solid fraction”, 2nd International Conference: Light Metals Technology 2005, Convention Centre – St. Wolfgang, Austria, 8-10 Giugno 2005.
165. R. Roberti, E. Bontempi, G. Cornacchia, L. E. Depero, M. Gelfi (2005). "Non conventional carbides characterization in aged martensitic steels", V Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, (INSTM), 26-29 settembre 2005, Geremeas-Maracalagonis, Cagliari (Italia).
164. M. Gelfi, E. Bontempi, G. Cornacchia, R. Roberti and L.E. Depero (2005). "Advanced X-ray laboratory microbeam techniques applied to metallurgy: the corrosion of superheater tube". EMAS 2005 - 9th European Workshop on Modern Developments and Applications in Microbeam Analysis, IUMAS-3 - 3rd Meeting of the International Union of Microbeam Analysis Societies, 22-26 Maggio 2005, Firenze (Italia).
163. L. E. DEPERO, M. GELFI, BONTEMPI E., A. POLA, ROBERTI R., D. ROLLEZ (2004). Microstructural and mechanical properties of zinc die casting alloys. ADVANCED ENGINEERING MATERIALS, vol. 6; p. 818-822, ISSN: 1438-1656
162. D. BRUNELLI, A. PANVINI, POLA A., ROBERTI R., M. RONCONI, S. ROSSETTI, M. TOSTI. (2004). Technological characterization and optimisation of a copper base diecasting alloy. HIGH TECH DIECASTING. 21-22 APRILE 2004.
161. ALESSANDRI I., GELFI M., BONTEMPI E., ROBERTI R., DEPERO L.E. (2004). Bidimensional X-ray diffraction analysis for structural and microstructural characterization of lanthanum manganite thin films. JOURNAL OF PHYSICAL CHEMISTRY. B, CONDENSED MATTER, MATERIALS, SURFACES, INTERFACES & BIOPHYSICAL. vol. 108, pp. 5189-5191 ISSN: 1520-6106.
160. I. ALESSANDRI, E. BONTEMPI, P. COLOMBI, L.E. DEPERO, M. GELFI , A. PANVINI, R. ROBERTI AND P. ZANOLA. (2004). New Potential Testing Methods for Advancing Characterization of Jewellery. Conferenza Internazionale Innovazione ed Evoluzione della Gioielleria Moderna , Vicenza, Giugno 2004.
159. E. BERTOLI, A. PANVINI, POLA A., ROBERTI R. (2004). OPTIMIZATION OF DIECASTING RUNNER-GATE SYSTEM. HIGH TECH DIECASTING. 21-22 APRILE 2004.
158. F. FRERINI, A. POLA, R. ROBERTI (2004). Caratterizzazione di tenacità e aspetto della frattura di leghe di alluminio thixocolate e colate con processi tradizionali. DIECASTING DAY 2004. GENNAIO 2004. (vol. N.46).
157. POLA A., R. ROBERTI, F. FRERINI. (2004). Microstructure and mechanical behaviour of cast aluminium components obtained by thixocasting and traditional processes. S2P Semi-Solid Processing. September 2004. (vol. 8th Int. Conference proceeding). Atti su CD-Rom.
156. M. GELFI, BONTEMPI E., ROBERTI R., L. ARMELAO AND L. E. DEPERO. (2004). Residual Stress Analysis of Thin Films and coatings through XRD2 Experiments. THIN SOLID FILMS. vol. 450, pp. 143-147 ISSN: 0040-6090.
155. M. GELFI, BONTEMPI E., ROBERTI R., DEPERO L.E. (2004). X-ray Diffraction Debye Ring Analysis for Stress Measurement (DRAST) : a new method to evaluate residual stresses. ACTA MATERIALIA. vol. 52, pp. 583-589 ISSN: 1359-6454.
154. M. GELFI, BONTEMPI E., A. POLA, ROBERTI R., D. ROLLEZ, L. E. DEPERO (2004). Microstructural and mechanical properties of zinc die casting alloys. ADVANCED ENGINEERING MATERIALS. vol. 6, pp. 818-822 ISSN: 1438-1656.
153. M. GELFI , A. MANDRACCHIA, F. OLIVINI, E. BONTEMPI, A. POLA, R. ROBERTI, D. ROLLETZ AND L. E. DEPERO. (2003). Structural and Mechanical Characterisation of Zinc Die Casting Alloys. European Congress on Advanced Materials and Processes, Losanna 1-5 settembre 2003.
152. NICOLACCI R., PANVINI A., POLA A., ROBERTI R. (2003). Studio e ottimizzazione mediante simulazione numerica di un getto pressocolato. BRESCIA RICERCHE. vol. 42. pp. 19-22 Inn.Tec. Ed., Brescia.
151. M. GELFI, E. BONTEMPI, V. RIGATO, A. PATELLI, A. GUIZZI, R. ROBERTI, M. TOSTI, L.E. DEPERO (2003). A New X-ray Method for Residual Stress Determination. In: C.A. BREBBIA, J.T.M. DE HOSSON, S.I. NISHIDA. Surface Treatment VI: Computer Methods and Experimental Measurements for Surface Treatment Effects. (pp. 317-331). ISBN: 1-85312-962-3. SOUTHAMPTON, BOSTON: WIT Press (UNITED STATES).
150. POLA A., R. ROBERTI, F. CROCI. (2003). Superalloys for investment casting applications. Convegno AIM: Cera persa e investment casting: innovazione arte e tecnologia. 9 ottobre 2003.
149. M. Gelfi, E. Bontempi, R Roberti, L E Depero (2003). “Residual stress analysis of thin films and coatings through XRD2”. European Materials Research Society, Strasbourg 10-13 giugno 2003
149. M Gelfi, E Bontempi, R Roberti, M Tosti, L E Depero (2003). “A new x-ray method for residual stress determination” Sixth International Conference on Computer Methods and Experimental Measurements for Surface Treatment Effects, 11 - 13 marzo 2003, Crete, Greece
147. PANVINI A., POLA A., ROBERTI R., ROLLEZ D. (2002). Effect of thickness on Young modulus of cast zamak components. DIECASTING WORLD; p. 16-17
146. GELFI M., BONTEMPI E., ROBERTI R., DEPERO L.E. (2002). Micro-diffrazione: una tecnica innovativa per la caratterizzazione strutturale dei materiali. BRESCIA RICERCHE. pp. 39 Inn.Tec. Ed.
145. PANVINI A., POLA A., ROBERTI R., ROLLEZ D. (2002). Effetto dello spessore sul modulo elastico di getti pressocolati in lega di zinco. BRESCIA RICERCHE. vol. 39, pp. 8-10 Inn.Tec. Ed., Brescia.
144. PANVINI A., POLA A., ROBERTI R. (2002). Trattamento allo stato liquido delle leghe da fonderia. FOUNDEQ EUROPE. pp. 53-58 Edimet, Brescia.
143. PANVINI A., POLA A., ROBERTI R. (2002). Prospettive di sviluppo del loast foam in fonderia. FOUNDEQ EUROPE. pp. 34-38 Edimet, Brescia.
142. PANVINI, POLA A., R. ROBERTI. (2002). Development and experimental validation of a mathematical model of the lubrication induced cooling of dies. High tech diecasting, Vicenza, febbraio 2002, (pp. 171-182). AIM, Milano Ed.
141. Beretta S., Donzella G., Roberti R. (2002). Crack propagation in the wheel-rail contact fatigue, Atti della giornata di studio "Rolling Contact Fatigue", Università degli Studi di Brescia, 15 Novembre 2002.
140. E. Bontempi, R. Roberti and L.E. Depero (2001). “X-Ray Microdiffraction: a Breakthrough for Structural Analysis”. 10th Meeting on SYNTESES AND METHODOLOGIES IN INORGANIC CHEMISTRY (New Compounds and Materials) 17-20 December 2001 - BRESSANONE (BZ)
139. M. Gelfi, P. Paderni, R. Roberti,, G. Donzella and L.E. Depero (2001). “In-situ residual stress measurements by X-Ray diffraction on a large diameter steel ingot”. Size-Strain III, Trento 2-6 December 2001, p.85-86
138. E. Bontempi, M. Gelfi, R. Roberti and L. E. Depero (2001). “Analysis of an underdeposit corrosion phenomena occurred on a eutectic Al-Si alloy steam boiler” proceeding of 7th European Conference on Advanced Materials and processes, ISBN 88-85298-39-7, 2001
137. Beretta S., Donzella G., Roberti R. (2001). Deep Shelling in Railway Wheels. Atti 13° Convegno Internazionale delle Sale Montate, Roma, 17-21 September 2001.
136. B. Bondioni, C. Veronesi, R. Roberti, M. Faccoli, A. Pola (2001). “Low temperature fracture toughness transition of duplex stainless steels”, Proceedings of Euromat 2001, Rimini, 10 – 14 June 2001, su CD-ROM.
135. R. Roberti, M. Faccoli, M. Gelfi, A. Ghidini (2001). “Rolling Contact Fatigue in R7T rail wheel steel”, Proceeding of Euromat 2001, Rimini, 10 – 14 June 2001, su CD-ROM.
134. F. Mor, M. Faccoli, R. Roberti (2000). “HVOF surface coatings for severe applications of duplex stainless steels”, Proceedings of 6th World Conference & Expo Duplex 2000, Venezia, 17 – 20 October 2000, 337 – 343
133. B. Bondioni, C. Veronesi, R. Roberti, M. Faccoli (2000). “Mechanical, corrosion and microstructural properties of duplex and superduplex stainless steel forging bars with diameter Ø > 400 mm”, Proceedings of 6th World Conference & Expo Duplex 2000, Venezia, 17 – 20 October 2000, 93 – 104
132. Beretta S., Donzella G., Roberti R., Ghidini A. (2000). Contact fatigue propagation of deep defects in railway wheels, Proceedings ECF13, S. Sebastian (Spain), 6-9 september 2000
131. R. Roberti, M. Faccoli, B. Bondioni, C. Veronesi (2000). “Mechanical, corrosion, and microstructural properties of duplex stainless steel forging bars with Ø > 400 mm”, Proceedings of Duplex America 2000 Conference, Houston, Texas, 29 Feb. - 1 Mar. 2000, 157 – 166
130. M. Faccoli, G.M. La Vecchia, R. Roberti, A. Molinari, M. Pellizzari (2000). “Effect of different coatings on thermal fatigue behaviour of AISI H11 hot work tool steel”, Int. J. Mat. Prod. Techn., 15, 2000, 49-62
129. M. Faccoli, G.M. La Vecchia, R. Roberti, G. Straffelini (1998). Thermal fatigue behaviour and fracture toughness of a Vacuum treated H11 steel, Proc. 11th Congress of the International Federation for Heat Treatment and Surface Engineering, Florence 19/21 october 1998, Vol. III, 437-448.
128. M. Faccoli, G.M.La Vecchia, R. Roberti, A. Molinari (1998). Danneggiamento da fatica termica dell’acciaio H11 per stampi da pressofusione con differenti tipi di rivestimento, Atti 27° Convegno Nazionale AIM Progettiamo il futuro, Orvieto 16/18 settembre 1998, Vol. 2, 428-434.
127. M. Faccoli, G.M. La Vecchia, R. Roberti, G. Straffelini (1998). Resistenza a fatica termica e tenacità alla frattura di un acciaio AISI H11 per stampi da pressofusione temprato in vuoto, Brescia Ricerche, Anno IX, n.23, maggio 1998, 10-17.
126. M. Faccoli, G. M. La Vecchia, P. Cobelli, R. Roberti (1998). Caratterizzazione microstrutturale e a frattura di compositi a matrice di alluminio ottenuti per infiltrazione a pressione ambiente, Atti XIV Convegno Gruppo Italiano Frattura, Trento 27-28 maggio 1998, 251-258.
125. G. Chioatto, P. Cobelli, M. Faccoli, G. M. La Vecchia, R. Roberti (1997). “Valutazione del rilassamento in viti ad alta resistenza: effetto della temperatura e della composizione chimica”, Atti del convegno Materiali- Ricerca e prospettive tecnologiche alle soglie del 2000, Milano, 10-14 novembre 1997, 1377-1384.
124. M. Faccoli, G. M. La Vecchia, R. Roberti (1997). “Il problema della tenacità alla frattura degli acciai per ruote monoblocco per trasporto ferroviario”, Atti del XIII Convegno Nazionale del Gruppo Italiano Frattura, Cassino, 27-28 maggio 1997, 386-396.
123. M. Faccoli, G. M. La Vecchia, R. Roberti (1997). “Caratterizzazione a frattura di acciai per bulloneria legati o microlegati al boro”, Atti del XIII Convegno Nazionale del Gruppo Italiano Frattura, Cassino, 27-28 maggio 1997, 369-378.
122. R. Roberti, G. M. La Vecchia, M. Faccoli (1996). “Aspetti metallurgici connessi con il comportamento a fatica, a rilassamento e a frattura di acciai per bulloneria”, Giornata di studio sulla bulloneria ad alta resistenza, Brescia, 27 settembre 1996, 72-98.
121. A.Molinari, G.Straffelini, R.Roberti, G.M.La Vecchia (1995). Duplex Stainless Steel embrittlement due to ageing at 375-475 °C temperatures. Proc. Fourth European Conf. on Advanced Materials and Processes, Venice, 25-28 September 1995
120. R.Roberti, A.Ghidini, G.M.La Vecchia (1995). Misura della tenacità alla frattura in campo di transizione dell’acciaio R7T. Atti IGF 11, Brescia, 4-6 luglio 1995, p. 169-178
119. R. Roberti, Sh. Basha (1995). Un nuovo metodo semplificato per determinare la curva J-R da carico e spostamento registrati in una prova su un singolo campione. Atti IGF 11, Brescia, 4-6 luglio 1995, p. 129-138
118. F.Dodi, Sh.Basha, R.Roberti (1995). Problemi connessi alla stabilità di tubi di trasporto gas danneggiati meccanicamente. Atti IGF 11, Brescia, 4-6 luglio 1995, p. 3-12
117. G.Donzella, S.Granzotto, G.M.La Vecchia, R.Roberti (1995). Surface heat transfer and Continuous Cooling Transformation modelization for the microstructure prediction by means of FEM analysis. Proc. Second Int. Conf. Surface Treatment ‘95, Milan, 7-9 June 1995
116. A.Molinari, R.Roberti, G.Straffelini, G.M.La Vecchia (1995). Tenacità alla frattura di strati nitrurati ottenuti con differenti modalità di trattamento. Atti 15° Convegno Nazionale Trattamenti Termici, Salsomaggiore, 23-25 maggio 1995, p. 229-237
115. G.M.La Vecchia, G.Donzella, S.Granzotto, R.Roberti (1995). Impiego del metodo degli elementi finiti per la valutazione della distribuzione microstrutturale in un acciaio al carbonio sottoposto a trattamenti di tempra e di normalizzazione. Atti 15° Convegno Nazionale Trattamenti Termici, Salsomaggiore, 23-25 maggio 1995, p. 77-86
114. R. DOGLIONE; R. ROBERTI; FIRRAO D.; R. FERRARIO (1994). Tenacità a frattura di un acciaio per stampi legato al boro: influenza dei trattamenti termici. Atti X Convegno Nazionale IGF, Torino, 8-10 giugno 1994, p. 349-366
113. M.Boniardi, G.M.La Vecchia, R.Roberti (1994). Stress relaxation behaviour in duplex and superduplex stainless steels. Proc. Int. Conf. Duplex ‘94, Glasgow, 13-16 Nov.1994, Vol.3, Paper 110
112. R. Roberti, G.M.La Vecchia, R.Bertanzi, W.Nicodemi (1994). Room temperature crack initiation and growth under sustained load in a superduplex stainless steel. Proc. Int. Conf. Duplex ‘94, Glasgow, 13-16 Nov.1994, Vol. 3, Paper 106
111. R.Roberti, G.M.La Vecchia, R.Bertanzi, G.Donzella (1994). Innesco e propagazione di frattura sotto carico costante ed a temperatura ambiente in un acciaio inossidabile bifasico. Atti X Convegno Nazionale Gruppo Italiano Frattura, Torino, 8-10 giugno 1994, p. 255-265
110. G.M.La Vecchia, R.Bertanzi, R.Roberti (1994). Infragilimento a 475 °C in un acciaio inossidabile austenitico-ferritico. Atti X Convegno Nazionale Gruppo Italiano Frattura, Torino 8-10 giugno 1994, p. 337-348
109. G.M. La Vecchia, R.Roberti, A.Bertasio, G.P.Marconi (1994). Surface residual stress measurements on as sintered and carburized steel parts. Proc. Int. Conf. Powder Metallurgy ‘94, Les Editions de Physique, Vol.2, p. 855-858
108. R.Roberti, G.M.La Vecchia, A.Bertasio (1994). Fracture toughness properties af precracked and notched specimens of two sintered steels. Proc. Int. Conf. Powder Metallurgy ‘94, Les Editions de Physique, Vol.2, p. 835-838
107. R.Roberti, Sh.Basha, G.M.La Vecchia, W.Nicodemi (1993). Fracture Toughness of Duplex Stainless Steels under Sustained Load. in “Process and Materials Innovation Stainless Steel”, Florence, 11-14 october 1993, p. 2.283
106. R.Roberti (1993). Fracture Behaviour of Austenitic and Duplex Stainless Steels. In “Process and Materials Innovation Stainless Steel”, Florence, 11-14 october 1993, p. 2.119
105. R. Roberti, W. Nicodemi, G.M. La Vecchia, Sh. Basha (1993). J-R Curve Dependence on Specimen Geometry and Microstructure in two Austenitic-ferritic Stainless Steels. Int. J. Pres. Ves. & Piping, 55, 1993, p. 343
104. R.Roberti, G.M.La Vecchia, G.Donzella (1992). Toughness properties of carburized layers. In “Materials Development in Rail, Tire, Wing, Hull Transportation”, AIM, Milano, 1992, vol.2, p. 155-162
103. R. Roberti, W. Nicodemi, E. Gariboldi (1992). Aspetti superficiali nella propagazione di cricche in regime di scorrimento viscoso. Giornata di studio su "Ingegneria delle superfici metalliche", CIRM, Roma, 24 novembre 1992
102. R. Roberti, W. Nicodemi, Sh. Basha, G.M. La Vecchia (1992). Anisotropia del comportamento meccanico di una lamiera di acciaio inossidabile bifasico. L'Acciaio Inossidabile, 59, 3, 1992, p. 2
101. W. Nicodemi, R. Roberti, A. Bianchi, F. Pedrotti (1992). Characterization of Centrifugally Cast Duplex Stainless Steel Pipes. 59th World Foundry Congres, Sao Paulo, Brasil, 1992